- Low Cost
- Productivity: up to 59.000 UPH
- Fast set-up time for reel changing
- Tape movement based on high resolution cameras
- Tape punching (insulation & reject) check based on high resolution cameras
- 4 indipendent test heads with probe card
- Fast debus tape punching mechanism
- 2D/3D Optical test
- Tape movement controller based on CCD camera
- Automatic realignment to cover plastic tape elongation
- Contact & contactless devices test
- Multi-Site test capabilities
- Real time production information SW
- Windows based software environment
Available Modules
- Base Unit
- Track puncher unit
- Indexing + hole detection camera
- Test unit
- Reject unit
- 2D Optical test unit
- 3D Optical test unit
- Buffer Unit
Test/Handling Turn Key Solution
A complete integration between the H1000 handler and the test equipment minimizes the footprint required, and improves the measurement accuracy. This modular system can be set-up in a very short time, and no sensor adjustment is required when product changes occur.
Fast Set-up Conversion Time
The tape alignment of the H1000 is based on high resolution camera units. This allows an easy and fast set-up for new product or to adapt the handler to any mechanical modification. The set-up time is less than 5 minutes: it is enough to select the software set-up and to replace the conversion kit.
 |
 |
| The 2 indipendent top/bottom test heads whith probe card |
The high resolution cameras, used for indexing
and inspection, allow a fast set-up |
Very High Throughput
- Parallel test, with 2 indipendent test heads
- Fast tape transport, based on servomotors
- Tape movement controlled by high resolution cameras
- No idle time: asynchronous tape movement between the track puncher unit and the test & reject unit, with a buffer unit
Full System Modularity
The handler can be equipped in 3 different configurations:
- 2 test heads with probe cards, mounted on the top side of the handler
- 2 test heads for contacting Combo Devices, mounted on the top and bottom sides
- 1 test head with antenna, for contactless test, mounted on the top or bottom side
 |
 |
| High throughput fully motorized track puncher unit |
Reject Puncher unit with tape stretch function camera |
Tape Stretch Function
For the H1000 handlers, irregularities in the tape pitch is not a problem: a high resolution camera is placed on the reject puncher, in order to align the tape before the punching.
2D/3D High Resolution Optical Test
The high-resolution cameras equipped on the H1000 handlers are able to detect all the possible physical and mechanical defects on the devices:
- The 3D optical test units:
based on SPEA laser technology - verify the eventual presence of tape burr, due to the reject punching unit
- The 2D optical test units:
inspect the tape surface, detecting errors in the layout, hole position, scratches, imprints, bubbles
 |
| 3D High Resolution Optical Test Unit |