You are here:   Board Test > Products by Function > Bed of Nails Board Testers

3030 series
MULTI-CORE   MULTI-FUNCTION   BOARD TESTER

 

 

True Parallel Test: 8x productivity
Ultra-fast test speed: lowest cost of test
Ultra-fast handling: 3 sec
Automated
application development
100% Fault Coverage
Cost-effective Per Pin architecture
Precise contacting with motorized receiver 
Fully upgradeable & customizable
1000+ of 3030 systems installed worldwide

 
 
 
 
 

 
 
 

3030 board tester range is a scalable in-circuit test platform that delivers the shortest test time, superior diagnostic accuracy and full test coverage for the widest range of electronic products.

Inline automated or manual loading, con gurable, upgradable on  eld and reliable over years, 3030 board tester range meets the test and throughput needs of electronic manufacturers worldwide.

Multi-Core Architecture provides up to 8x greater productivity compared to conventional test equipment, dramatically lowering the cost of test.

Common hardware and software across the whole 3030 testers range mean same test result, easy test program migration and compatible spare parts.

Test program generation is quick and automatic with Leonardo OS which enables unskilled user to develop a test program in a very short time.

 
  
 
 
 
 
   
 
 

 

True Parallel Test:
8x Productivity with Multi-Core

3030 board testers can be equipped with up to 8 independent Cores - each one with independent CPU, local memory and instrumentation - able to test in parallel up to 8 boards/panels of boards.

Compared to standard ICT testers, SPEA 3030 productivity is up to 800% higher, thus minimizing the cost of board testing.

Moreover, with Dual-Stage option, 3030 systems deliver different test techniques concurrently (e.g.: In-Circuit + Functional, In-Circuit + On-Board Programming etc...), optimizing the tests among the two stages and further reducing the time and costs.

 


 
 
 
  
 
 
 
 

 

 

 

 

 

 Ultra-fast test speed
Compared to standard ATE, 3030 test speed is significantly higher. Dedicated CPU on each Core guarantees no delay between instrumentation and PC.

High-performance relays provide fast switching time. Instruments architecture minimizes instruments setup time during test.
Possibility to execute different measurements simultaneously, with a single test Core, further reduces the test time.


 

Ultra-fast handling
3030 IL is equipped with a re-designed handling module, which halves the handling time compared to previous generation.
Just 3 seconds are enough for handling a medium-size PCBA, including board loading, presser down, presser up and board unloading.

 
 
 
  
 
 
 
 
 
 

Automated Application Development

- Automatic test program generation in minutes
- Automatic debug & tuning
- Minimized application development costs: automatic generation of the file for fixture drilling and wiring
- Automatic CAD data recognition & import
- Automatic test report generation
- User-friendly intuitive graphical interface
- Real time production monitoring and analysis


Discover Leonardo OS Software

 
 
 
 
 
 
 

 

Cost-effective
Per Pin Architecture


Each 3030 channel is configurable by test program.
Every nail can be used to perform any kind of test. This instrument/receiver 1:1 ratio guarantees several benefits: faster test generation, easy ECO management, full flexibility.

 
 
 
 
 
 
 

Fully upgradeable & customizable

 

 

 3030 can be factory equipped or upgraded on field with all kind of instrumentation useful to satisfy the test requirements.

It is possible to integrate power instrumentation (as AC/DC generators, Active Loads, Power Matrix etc.) as well as third party instruments to increase test capabilities and productivity.

 

 

 
 
 
 
 
 
 
 

100% Fault coverage.

Forget field returns

 

 

 

3030 has been designed to help electronics manufacturers increase their product quality 

By executing a complete range of test techniques with its high- performance instrumentation and stimuli, 3030 can reliably find faults undetectable by standard ICT tester. 

 

 

 

 
 
 
 
 
 
 
 

PC-independent Architecture

 

 

With SPEA 3030 PC-independent Architecture the test program is resident in the tester CPU and the test speed is determined by the system CPU.

Antivirus and other applications running on the PC do not affect the test speed. Moreover you can change/update the PC at any moment, without having to re-debug the test program.

 

 

 

 

 

 

 
 
 
 

 
 
 

Precise contacting with motorized receiver

 

Tester and receiver are fully integrated, both designed by SPEA to provide a reliable cost-effective turnkey test equipment. Board contacting is safe and precise: with its motorized receiver it is possible to program the presser speed according to the UUT characteristics. The descent is always planar, and it is also possible to program different contacting levels, so to execute different tests on different areas of the UUT.

Direct cable-less connection between system instrumentation and  xture guarantees signal integrity. Finally there is no need for compressed air: 3030 IL is easy to be moved. 

 
  
 
 
 
 
 

Fixture and Test Program Migration

 

SPEA Common Architecture allows test programs to work with all SPEA board tester systems.

This guarantees a quick move of your production from one system to another, depending on the production needs.

But also means compatible spare parts, reduced support cost, common software environment.

Moreover, to minimize application costs and optimize system utilization, 3030 In-Line fixture is fully compatible with 3030 manual systems and vice-versa.


 
 
 
 
 
 

1000+ of 3030 systems installed worldwide .

 

SPEA 3030 bed-of-nails testers have been proudly selected by 1000+ of OEMs and EMSs worldwide, leaders in the following markets:

  • Automotive
  • Industry
  • Defence
  • Consumer
  • Aerospace
  • Telecommunication
  • Transports
  • Lighting
  • White goods
  • Security

 

 

 

 

Do you want more information? We have detailed documentation on these features