4080 sets new benchmarks for flying probe board testing, delivering unparalleled throughput and test capabilities.
- Up to 180 touches/sec
- Min. Pad size: 30 μm
- 8 Multi-Tool Flying Heads
- Dual side probing
- Full test coverage
- Granite chassis
- Compact footprint: 2.2 m2 (23.14 ft2)
- App-based software
- Manual + Conveyor loading on same system
Full linear motion with linear optical encoders on XYZ axis provide very high acceleration and speed, along with positional repeatability and accuracy over unlimited travel.
The highest positioning accuracy is guaranteed by sub-micron resolution Linear Optical Encoders on each XYZ axis, making 4080 suitable to touch 50μm pads at high speed and without leaving marks on them, like no other flying probe system can do.
Despite the speed, 4080 probes will touch the board softly. Programmable probing force makes the probes able to contact components at near-zero energy: even the most delicate electronics (ultra-fine pitch pads, sticky boards, flex circuits) can be tested with no risk of damage.
Full test coverage is provided by a complete range of test capabilities integrated in the 4080, and by the highest available measurement accuracy offered by “Flying Tester Technology”: a complete forcing/measurement board integrated on each axis.
The natural granite chassis, combined with state-of-art linear motion technologies, offers low vibration and thermal stability, ensuring unprecedented probing precision at ultra-fast test speed.
Compared to conventional iron or steel, natural granite offers best damping characteristics and thermal stability, so to minimize vibrations and deformation effect that would affect accuracy and reliability through time.
4080 footprint is very compact: as little as 2.2m2, including in-line board transportation.
With a throughput that is three times (or even more!) higher than the fastest single-side flying prober on the market, the 4080 moves the ROI time of high volume productions to a level that is very close to the one of a traditional bed-of-nails tester.
- Highest measurement performance & accuracy (0.1pF)
- Signal integrity
- No measurement degradation or interference
- Immediate signal acquisition (within hundreds of microseconds)
Up to 28 Top&Bottom Flying Tools
The 8 axes of the 4080 (4 top + 4 bottom) allow you to install up to 28 simultaneous flying test tools, within a range of more than 50 possible ones: in addition to the electrical probes, used to perform all the electrical tests, a variety of test tools are available to expand 4080’s test capabilities.
Automatic Board Handling
Minimum footprint, maximum efficiency.
SPEA has designed and manufactured a new series of Automatic PCB handling Equipment, able to perform autonomous loading and unloading operations. SPEA Board Handling Equipment is available in modular configurations, which allow for quick changes on field, and stand out for their reduced footprint, as they take up just one third of the floor space typically needed by traditional PCB handling equipment.
A world of Apps.
4080 users take the advantage of working with a friendly, appbased software environment, similar to what smartphones made us used to. Every app is dedicated to a defined function, while its update is independent and does not affect overall software integrity. Leonardo 4 operating system incorporates all the functionalities and effectiveness of previous Leonardo versions, bringing them a step ahead. In the world of apps you want to use.
100% Short Circuit Test
Nodal Impedance Test
Open Pin Scan
Power On Test
Led Light Test
3D Laser Test
5G RF Test
|Application||Medium to Mass Production|
|UUT probing||Dual Side|
|Multi-Probe Flying Heads||8 (4 top + 4 bottom)|
|Max. Board Size (L x W)||1000 x 460mm (39.4 x 18.1”)*|
|Footprint (L x W)||1700 x 1300mm (2.2m2)|
|* For larger boards, please contact SPEA.|